If your chainsaw is not working properly.
You need to clean your chainsaw chain.
In this guide, We will guide you on how to clean a chainsaw chain so it looks spotless and runs like new again.
Cleaning a chainsaw chain isn’t particularly difficult, however, and it doesn’t require the use of any special solvents.
So, Let’s get started.
Table of Contents
Tools You Need to Clean the Chainsaw chain
- Plastic Bucket
- A cup of household ammonia
- Bristle Brush
- Water
Step By Step Guide on How to Clean a Chainsaw chain like new
Step 1 – Disconnect Your Chainsaw
First, to avoid getting electrocuted make sure that the chainsaw is disconnected. The chainsaw runs with different types of power. Some chainsaw runs on battery so they have to remove the battery, Some chainsaw runs on gas so have to drain the fuel tank and disconnect the spark plug and some chainsaw also runs with Corded Electric so have to detach the power cord.
Step 2 – Remove The Chain
Now you have to loosen the chain adjustment knob on your chainsaw so the chain loosens enough to be taken off its guide bar easily. After this process cleans the guide bar.
Step 3 – Soak the chain
Now create a mixture of a cup of ammonia and water in a plastic bucket and keep it for 15-20 minutes. Do this role outside the house due to ammonia fumes. Soak the chain in a solution of ammonia and water Then rub the chain gently with a brush with soft bristles. Soak the chain in water and continue to scrub until the chain is sparkles.
Step 4 – Clean the Chain
After about three hours of soaking, Use a bristle brush to clean the chain. This will rid the chain of debris such as caked-on dirt. Lift the chain out of the water and let the excess drip off into the tray.
Step 5 – Rinse the Chain
To get the ammonia off the chain, rinse it thoroughly. This can be easily done with a garden hose that has a spray nozzle attached. The chain can be dried with a towel or rag and then hang up to dry completely.
Step 6- Reattach the Chain
Attach the chain to the guide bar of the chainsaw. Once the chain is secured, tighten it using the knob.
How to maintenance your chainsaw property
Follow some important steps to keep your chainsaw like a new
Always keep loose parts tight
You should tighten your chainsaw parts (such as nuts, bolts, and screws) from time to time because of continuous work.
Always Check the Filter
Before you use a chainsaw, make sure to check the air filter. Clean it with warm soapy water if it’s dirty. It should be dried completely before you use your chainsaw. You can replace your filter if it is too dirty before you use your chainsaw.
Monitor Safety Features
Safety features on your chainsaw should be regularly checked. To ensure that your chainsaw is safe, keep it clean. Also, make sure to check for any damage to the chain catcher and the throttle trigger lockout. Before you continue using the power tool, take care of any damaged parts.
Replace Old Gasoline
You should always check the fuel in your chain because more chainsaw keeps lying in the garage for months so we do not check fuel and chainsaw gets worse therefore we should always check chainsaw fuel.
You might like our comparison on Stihl MS170 vs Husqvarna 120.
Frequently Asked Questions
Can you use any chain on a chainsaw?
Yes, you can use any chain. If you do some research before buying, which is the best for my chainsaw so it would be better.
What are the different types of chainsaw chains?
There are many types of chainsaw chains available in the market.
- Cutter Types
- Full Chisel.
- Semi-Chisel.
- Low Profile.
- Chain Arrangement
- Full Component.
- Skip.
- Semi Skip.
What is the best chain for a chainsaw?
If you want to buy a new chainsaw chain. You should consider these things
- Know the Numbers
- Pitch
- Gauge
- Drive Links
- Chain Length
- Chain arrangement
The best chainsaw chain for you depends on the type of chainsaw you own, your cutting experience, and the type of wood
How to fit a chain on a chainsaw?
Reattach the chain to the guide bar of the chainsaw. After the chain is in place, use the knob to tighten the chain.
What happens when a chainsaw chain breaks?
If you break the chain of your chainsaw when you are done, then you should remove the broken chain because it is now useless and replace it with a new one.
You may like our articles on which way does a chainsaw blade go on and how to take a link out of a chainsaw chain.