Why does my Chainsaw keeps Throwing the Chain?

Chainsaws are widely used by individuals to conduct outdoor activities. However, it is crucial that they be handled responsibly in order to prevent injury.

Some common causes of chainsaw problems are improper lubrication, incorrect adjustments, and worn or broken chains.

It’s vital to discover how to manage chainsaws correctly, especially to stave off potential safety risks.

So, Why does my chainsaw keeps throwing the chain?

There could be any number of reasons why your chainsaw is throwing the chain, but some are more common than others. The following are some of the most likely culprits:

The chain is too tight:

If the chain is too tight, it will put a lot of unnecessary strain on the engine and can lead to the chain coming off. Loosen the chain by turning the adjusting screw on the side of the chainsaw until there’s about 1/8″ of play in the chain.

The bar oil is low:

This one is pretty self-explanatory. If there’s not enough bar oil, it can cause the chain to come off. Make sure to check your bar oil level often and top it up as needed.

The guide bar is bent or twisted:

A crooked or warped guide bar can cause the chain to jump off track.

Why won’t my chainstay tight on my chainsaw?

There could be various reasons why your the chain saw’s chain will not stay tight. One reason might be that the force adjuster is not correctly set. The tensioner is the part of the chainsaw that tensions the chain.

It is usually a small, spring-loaded arm located near the base of the bar. If the tensioner isn’t set correctly, it can cause the chain to come loose. Another reason for a loose chain may be a dull blade.

A dull blade will not cut as well as a sharp blade, and it will also put more stress on the chain and gears. The issue with the chain occurring could lead to its failure.

Finally, if your chainsaw isn’t getting enough oil, it can also cause the chain to come loose.

Can you over-tighten a chainsaw chain?

Chainsaw chains are important for the function of the saw but can be easily damaged if not properly taken care of. One way that people damage their chains is by over-tightening them.

This can loosen or break the chain that is connected to the lock. Overtightening rotary catches can also cause the chain to destroy its own rod.

To avoid damaging your chainsaw chain, be sure to tighten it only until it is snug against the bar and no further.

Why does my chain keep getting loose?

Why does my chainsaw keeps throwing the chain?
Source: kylesgarage.com

If the chain on your chainsaw is loose, it can come off the bar and cause serious injury. A loose chain can also damage the saw and make it difficult to cut effectively. There are a few different ways to tell if a chain is excessively loose.

1.  There will be a chain tension indicator on the side of the chainsaw. If your chain tension indicator displays the cycle as being too tight or too loose, soften it accordingly.

2. Check to see if the chain moves easily when you pull it forward or push it back. If it does, the chain is likely too loose.

3. Try cutting a piece of wood. If the wood chips are small and even, the chain is likely properly tensioned. If the wood chips are large and uneven, the chain is likely too loose.

How do you know if the chain on a chainsaw is too loose?

Saw chains are designed to cut through wood quickly and smoothly. If the chain on your chainsaw is too loose, it can cause the chain to come off the bar, which can lead to a dangerous situation. There are a few ways that you can tell if the chain is too loose:

  • When you start the chainsaw, does the chain move freely? A loose chain will move more freely than a tight chain.
  • Can you see daylight between the chain and the bar? A tight chain will have very little space between it and the bar.
  • Can you easily wiggle the chain side-to-side? A loose chain will move more easily than a tight one.

If you answered “yes” to any of these questions, your chainsaw’s chain is likely too loose.

How do you tighten a chainsaw chain?

There are a few things you need to have on hand before you start tightening your chainsaw chain. You will need a flathead screwdriver, a chainsaw chain tightening tool, and a can of aerosol lubricant.

To make sure that the chainsaw is off and unplugged, you have to ensure you turn it off and unplug it. If the chainsaw is plugged in, there is a risk of electrical shock.

Once the chainsaw is unplugged, take the screwdriver and remove the bar cover. This will allow you to use the chain screw for the chain.

Seat the tightening device in one of the notches in the chain tightener, then take the chain tightening tool. Gently pull back on the tool while turning it clockwise.

You might think that you’re pulling the chain when you turn the tool. This indicates that you are tightening it. Keep rotating until you feel like you’ve tightened it enough.

Spread the love