Top 5 Best 2 Cycle Oil for Chainsaw In 2022: Top Picks

When shopping for chainsaw oil, it’s important to remember that not all oils are created equal. Some oils are better at lubricating the chain than others.

In general, you will want to use a 2-cycle oil specifically designed for chainsaws. These oils contain additives that help keep the chain lubricated and free of build-up.

There are many different brands of 2-cycle oil available, so it can be tough to know which one to choose.

If you’re not sure which oil to buy, we recommend looking for an oil that is specifically labeled as “chainsaw oil” or “2-cycle oil.”

Comparison Chart

When it comes to finding the best 2 cycle oil for chainsaws, it can be a daunting task. With so many brands and products on the market, how do you know which one is right for you?

To make things a little easier, we’ve put together a comparison chart of some of the most popular 2 cycle oils available. This will help you decide which oil is the best fit for your needs.


Product Name



Husqvarna XP+ 2 Stroke Oil

●  Item Dimensions: ‎6.75 x 4.5 x 3 inches
●  Item Weight: ‎1.1 pounds
●  Liquid Volume: 2.6 oz.

Echo Pk6 2-Gallon Power Blend Oil Mix

● Item Dimensions: 8.4 x 5.4 x 3.3 inches
● Item Weight: 2.25 pounds
● Liquid Volume: 2 Gallons

Lawn-Boy 2-Cycle 32:1 Ashless Engine Oil

● Item Dimensions: 1.6 x 2.8 x 5.2 inches
● Item Weight: 9.1 ounces
● Liquid Volume: 8 Fluid Ounces

Stihl High Performance 2-Cycle Engine Oil

● Item Dimensions: 8.2 x 5 x 3.8 inches
● Item Weight: 2 pounds
● Liquid Volume: 2.5 Gallons

Maxima K2 2-Stroke Synthetic Premix Racing Oil

● Item Dimensions: 9.9 x 6.3 x 3.3 inches
● Item Weight: ‎3.95 pounds
● Liquid Volume: 64 Fluid Ounces

Top 5 Best 2 Cycle Oil for Chainsaw Reviews

1. Husqvarna XP+ 2 Stroke Oil (Our #1 Pick )

Best 2 Cycle Oil for Chainsaw

Husqvarna has recently released the XP+ line of 2-stroke oil, initially catering for the commercial series XP saws before expanding to other machines.

Husqvarna XP+ 2 Stroke Oil is a specially formulated oil for high-performance two-stroke engines. It has been designed to deliver optimum engine performance and protection while providing low emissions and easy starting.

It is important to note that Husqvarna is different from most manufacturers in terms of their two-stroke oils; they take an additive approach instead of trying to thicken the oil like most manufacturers (ie Stihl).

As well as adding special additives, it must be said that the base oil itself is quite good (although I am no chemist) and rivals premium conventional two-stroke oils.

The difference comes down to how much additive is added; many brands only add very little, which means you might start seeing problems after a few tanks or hot starts. Husky use a significant amount of additive, which is why they can make this claim.

In my experience, Husqvarna XP+ 2 Stroke Oil works extremely well in my two-stroke engine. The oil delivers good performance and protection, while also reducing emissions and making it easy to start. I would recommend this oil to anyone looking for a high-quality product for their two-stroke engine.


  • It runs longer and smoother
  • The formula has been verified 


  • Not recommended for Stihl weed eaters
  • Little quantity – you may get 1 bottle rather than 6.


2. Echo 6450002 Pk6 2-Gallon Power Blend Oil Mix

Best echo 2 Cycle Oil for Chainsaw

 The Echo 6450002 PK6 2-Gallon Power Blend Oil Mix is a great choice for people who want an easy way to mix oil and gasoline. This product is designed to make it easy to mix the right proportions of each fuel, so you can get the most power out of your engine. The 2-gallon size means that you can mix enough fuel for multiple uses, making it a convenient option for people who need to fuel up frequently.

This product is also designed to help reduce emissions and protect your engine from wear and tear. The high quality of the oil blend means that you can rely on it to keep your engine running smoothly, even under heavy use. Overall the Echo 6450002 PK6 2-Gallon Power Blend Oil Mix is a great product for people who want to take care of their engine easily.

This oil mix is also designed to work well in all types of weather conditions, so you can rest assured that your engine will be protected even in harsh environments. Additionally, it is also non-toxic and biodegradable, so it is safe for both you and the. Overall, the Echo 6450002 Pk6 2-Gallon Power Blend Oil Mix is a great choice if you are looking for an oil mix that can provide your engine with top-notch protection and performance.


  • Original equipment manufacturer oil;
  • A good volume
  • A strong seal
  • Excellent quality
  • Environment-friendly
  • Saws from Husqvarna, Shindaiwa, and Stihl are compatible.


  • Some customers only utilize it during the summer.


3. Lawn-Boy 89930 2-Cycle 32:1 Ashless Engine Oil

best engine oil for chainsaw

When choosing the right engine oil for your Lawn-Boy mower, it is important to pick one that is specifically designed for two-cycle engines. The 89930 2-Cycle Ashless Engine Oil has been specially formulated for just that.

One of the biggest benefits of this oil is that it contains high levels of detergents. This helps to keep fuel injectors and carburetors clean, which can lead to improved performance and longer engine life. It also prevents carbon deposits from forming, which can cause fouling and decreased throttle response.

In order to get the most out of your Lawn-Boy mower, we recommend changing the oil every 10 hours of operation or every month, whichever comes first.

If you are running a metal impeller on your 42″ Riding Mower, such as the one offered by Lawn-Boy, it is highly recommended that you replace it with stone impellers. Stone impellers are much more reliable and will wear longer than those made from metal.


  • Good volume
  • Ideal for hot temperatures
  • Cleanliness is achieved by the use of special additives
  • One-of-a-kind formula
  • Stable
  • Lawn-Boy and Toro 2-cycle engines are compatible.


  • Not applicable to all 2-cycle chainsaw engines
  • They may transmit 1 pack rather than 4


4. Stihl 0781 319 8015 High-Performance 2-Cycle Engine Oil

Best stihl 2 Cycle Oil for Chainsaw

When it comes to choosing the right engine oil for your Stihl 0781 319 8015, you want to make sure you’re getting a quality product. That’s why we’ve put together this review of the Stihl 0781 319 8015 High-Performance 2-Cycle Engine Oil.

This oil is designed to provide superior protection and performance in high-performance engines. It’s formulated with an exclusive additive system that helps reduce wear and protects against corrosion. And it features a low-friction formula that helps keep your engine running smooth.

Plus, the oil is biodegradable and non-toxic, so you can rest assured knowing it won’t harm the environment. If you’re looking for engine oil that can keep your high-performance engine running like new, the Stihl 0781 319 8015 High-Performance 2-Cycle Engine Oil is worth considering.

We highly recommend this product for anyone looking for a quality engine oil that can protect their high-performance engine.


  • Can produce up to 2.5 gallons
  • High-quality 2-cycle engine oil 
  • Easy to use
  • Compatible with the majority of Stihl chainsaws


  • Expensive


5. Maxima 22964 Formula K2 2-Stroke Synthetic Premix Racing Oil

Best maxima 2 Cycle Oil for Chainsaw

Maxima has come out with a new synthetic 2-stroke premix racing oil called Formula K2. This oil is designed to provide maximum protection and performance in high-performance two-stroke engines. It is made from a blend of synthetic base stocks and advanced additives that work together to provide complete engine protection.

Formula K2 is specially formulated to resist the formation of carbon deposits and protect against wear. It also helps to reduce smoke and emissions, while providing excellent cooling properties. Plus, it resists foaming and oxidation, making it ideal for use in high-output racing engines.

If you’re looking for an excellent quality synthetic 2-stroke racing oil, then be sure to check out Maxima’s Formula K2. It’s sure to provide you with the protection and performance you need for optimum racing performance.


  • Formula for high RPM racing
  • Exceptional performance
  • Keep chainsaws from rusting and corroding.
  • Excellent premix oil


  • Expensive 
  • Strong odor


Also ReadEcho CS 400 vs Echo CS 490 Chainsaw

2 cycle chain saw oil is an essential part of any chainsaw. The two-cycle engine works by pulling down a piston, which turns the crankshaft, and then another pull starts the whole process over again. It requires fuel mixed with at least 30% oil to function properly. Normally people use bar & chain lubricant for this purpose but because of its high viscosity, it causes more wear on the chain than what’s desired.

What Is 2-Cycle Oil Made Up of?

The two-cycle engine mixes fuel and oil before it’s burned. The ratio of gas to oil is usually 1:1 but it can be different depending on the engine. The best 2 cycle oil for chainsaws is made up of base oils, detergents, and additives.

How Do You Choose the Best One?

When it comes to chainsaw maintenance, one of the most important things you can do is use the right type of oil. Using the wrong type of oil can cause your chainsaw to run poorly and even damage the engine. So, how do you choose the best 2 cycle oil for chainsaws? 

Best 2 Cycle Oil for Chainsaw

Here are some tips:

1. Choose an oil that is specifically designed for chainsaws.

There are many different types of 2 cycle oil available, but not all of them are meant for chainsaws. Choose an oil that is specifically labeled as “chainsaw oil.” This will ensure that it is formulated for use in chainsaws and will provide the best performance.

2. Look for an oil that has a high viscosity.

Viscosity is a measure of how thick or thin a liquid is. The higher the viscosity, the thicker the oil. You want to choose an oil that has a high viscosity so that it will provide good lubrication for your chainsaw.

3. Consider the climate where you live.

If you live in a hot climate, you’ll need an oil that can handle high temperatures. Look for an oil that is labeled as “high-temperature.” This type of oil will be able to withstand hotter temperatures without breaking down or evaporating.

4. Make sure the oil is certified by the American Petroleum Institute (API).

The API is a nonprofit organization that sets standards for the quality of oils. oils that are certified by the API have been tested and meet the organization’s standards for quality.

5. Read the oil’s packaging carefully.

Not all chainsaw oils are created equal. Some oils are designed for light-duty use, while others are meant for heavy-duty use. Make sure you choose an oil that is appropriate for your chainsaw’s needs.

Choosing the right type of oil is essential for keeping your chainsaw running smoothly. By following these tips, you can be sure to choose the best 2 cycle oil for a chainsaw for your needs.

2-Stroke Oil Additives

The majority of two-cycle oils come with additives to increase lubrication, reduce friction, keep your engine clean, and improve performance. You should find a formula that includes zinc or phosphorous since they protect against wear and tear from heat. 

A small amount of Teflon can be added to help lubricate internal parts which reduce friction and keeps it running better for longer periods. You also want to look for an oil that has a high viscosity index number since this tells you its ability to flow at a wide range of temperatures. Make sure not to choose one with too much detergent because it could cause deposits in the carburetor, and ultimately, engine failure.

2-Cycle Oil Types

There are three types of base oils used in two-cycle oils: synthetic, semi-synthetic, and mineral. Synthetic oils are made from man-made materials and have the best properties out of the three. They’re more expensive but they offer the best protection for your engine, last longer, and resist high temperatures better than the other two types. 

Semi-synthetic oils are a blend of natural and synthetic materials while mineral oils are just that: made from crude oil. If you’re looking for the best 2 cycle oil for a chainsaw, then you should stick with a synthetic or semi-synthetic oil to ensure optimal performance.

How Often Should You Oil Your Chainsaw?

The frequency with which you oil your chainsaw will depend on a number of factors, including the type of chainsaw, the make and model, the saw chain, and how often you use the chainsaw. In general, most chainsaws need to be oiled every time they are used. However, some high-end chainsaws may only require oiling once a month or even less often.

If you are not sure how often your chainsaw should be oiled, consult the owner’s manual or contact the manufacturer. They will be able to tell you exactly how often your specific chainsaw needs to be oiled for optimal performance. Failing to properly oil your chainsaw can cause damage to the saw chain and other components, which may result in increased wear, shortened product life, and pose a risk of injury.

How to Oil Your Chainsaw Properly?

When you finish using the chainsaw, let it run for 15 seconds to make sure that all the oil has drained out of the bar and into the tank (if applicable). If the saw is equipped with an automatic oiling system, ensure that it is turned on. Fill the oil reservoir or pump cup with three-in-one engine oil, SAE30 weight motor oil, or SAE10W40 automotive gear lube. 

Pour more oil into the reservoir as needed. Using a different type of engine/transmission lubricant other than those mentioned above may cause damage to your chainsaw. Place the chainsaw on a level surface and ensure that it is in the “off” position. Locate the oil cap – it will typically be on the side of the saw near the chain. Remove the oil cap and pour in the recommended amount of oil, being careful to avoid overfilling. Replace the oil cap, making sure it is secure, and tighten it if necessary.

That’s how you properly oil your chainsaw! Be sure to follow these instructions each time you use your chainsaw to keep it running smoothly and safely. For more information on chainsaw maintenance, safety, and operation, consult an expert or visit your local home improvement store.

Frequently Asked Questions (FAQs)

What is 2 cycle oil?

2 cycle oil is a type of engine oil that is specifically designed for use in chainsaws and other two-stroke engines. It helps to lubricate the moving parts of the engine and also helps to control emissions.

What is the best chainsaw oil to use?

It depends on the environment in which you are operating your saw. Every situation is different and should be considered separately.

How do I know if my chainsaw needs 2 cycle oil?

Not all chainsaws require 2 cycle oil – check your owner’s manual to be sure. If your saw does require it, the engine will usually have a yellow or orange cap on the spark plug that needs to be removed for you to add the oil.

How often should I change or add 2 cycle oil?

Most chainsaws require you to drain out the old 2 cycle oil every time you use it and replace it with fresh oil before starting up.

What is the difference between Bar & Chain oil and 2 cycle oil?

Bar & Chain oil is specifically designed for chainsaws and has a higher viscosity than 2-cycle oil. This means that it will stay on the bar and chain length, providing better lubrication and protection.

Is it necessary to use chainsaw oil?

Yes, using chainsaw oil is essential for keeping your bar and chain lubricated and protected. Without it, you run the risk of excessive wear and tear on your equipment, leading to costly repairs or replacements.

Conclusion: Which Brand Would You Buy?

We’ve listed some of the best 2 cycle oil for chainsaws. These oils come from various brands and each one has its pros and cons depending on what you’re looking for. We recommend going over all of them since they have different features to make it easier for you to choose an oil that will work best depending on your needs.

You may like our article on different types of chainsaws and their uses.

Spread the love

Leave a Comment