The 9 Best Climbing Chainsaw – Make cutting trees easier than ever!

If you have to climb the tree or use a ladder to cut high limbs and branches.

If so, you need to think about getting the best climbing chainsaw.

One of the main reasons why most arborists buy these chainsaws is because they can be operated with one hand. 

But you can not be sure which one to right? then, you’ve landed in the right place.

In this post, We will show you the best climbing chainsaw reviews that will help you to make the right decision.

That’s why I have created this inclusive guide to help you pick the best climbing chainsaw that’ll make your life much easier and keep you safe.

Let’s get started.

Comparison Chart


Product Name



Worx WG322

● Battery-powered

● 10 Inch Blade
● 3 Year Warranty


● Battery-powered

● 12 Inch Blade
● 3 Year Warranty

Husqvarna 460 Rancher

● Gas Powered

● 24 Inch Blade
● 2 Year Warranty


● Battery Powered

● 12 Inch Blade
● 3 Year Warranty

Worx WG309

● Corded-Electric

● 10 Inch Blade
● 3 Year Warranty

Makita XCU06Z 

● Battery Powered

● 10 Inch Blade
● 3 Year Warranty

Echo CS271T12

● Gas Powered

● 12 Inch Blade
● 2 Year Warranty

Tanaka TCS33EDTP/12

● Gas Powered

● 12 Inch Blade
● 7 Year Warranty

Echo CS-400

● Gas Powered

● 18 Inch Blade
● 1 Year Warranty

Can I use a ladder to climb the tree trunk?

A stepladder may work, but it is not recommended as a safe means of climbing up and down from any tree. If the trunk has been cut low enough to access from the ground then it would be better off to use a long rake pole to clear away debris from under the tree.

In most cases, felling trees close to homes, buildings, powerlines, roads, sidewalks, etc… is never recommended due to added dangers that can arise during this task if proper precautions were not taken into consideration beforehand.

If done incorrectly then there could be various problems that may arise such as damage caused to these areas, a weakened tree with a higher chance of falling in the future, and even potential injury to yourself or those around you.

Will I need training or certification to climb over the tree with a chainsaw?

Training is highly recommended when it comes to felling trees. It would be wise for you to enroll in a recognized training course before attempting this task on your own without professional supervision.

Safety should always be your top priority while using any power tool around your home. It may also save you from injury or damage done if an emergency were to arise where you need to rely on your knowledge of safe practices while climbing up and down the tree trunk with a chainsaw in hand.

Always inspect the tree that needs removal, look at larger branches that are above, then check for any signs of rot or insects beginning their work under the bark. This will help you determine whether this task should be left to a professional.

9 Best climbing chainsaw in 2022

1. Worx WG322 Power Share Cordless Chainsaw

best climbing chainsaw

When it comes to our top pick for the best climbing chainsaw, Our overall selection goes to the Work WG322. This chain is very good for those who work climbing on the tree. It comes with auto-tension and auto-oil systems.

The cordless 20V PowerShare makes it very fast and powerful. The best thing about this chainsaw is that it is lightweight, only 6.2 pounds, about as much as a 2-Liter bottle of soda. With which you can easily climb in the tree.

The set comes with a 20V 2.0 Ah battery as well as a charger. This will give you approximately 1 hour of cutting time. You can also upgrade to the 4-battery charger and have your entire set fully charged in just half an hour.

Additionally, This chainsaw has an automatic chain lubrication system which makes smoother, more effective cuts and longer life.


Power SourceBattery-powered
Item Weight6.19 Pounds
Chain Speed12.5 feet/second
Dimensions25 x 7.5 x 9.5 Inches
  • Low kickback bar and chain
  • Easy chain tensioning
  • Comes fully assembled and ready to use
  • Relatively lightweight
  • Highly affordable
  • Battery and charger not include


2. CRAFTSMAN CMCCS620M1 Cordless Chainsaw

best top handle chainsaw

If you want to save a bit of cash and still get a climbing chainsaw, this is your next best choice. This climbing chainsaw option from Craftsman is great who work climb on the tree.

It comes with some great features that will give your tool a longer lifespan. The V20 cordless system makes this chainsaw very powerful and fast. This chainsaw is ideal for medium-duty tasks such as trimming trees or cutting in a garden.

When it comes to battery, this chainsaw has a 4.0AH Lithium-ion battery pack, Which will make you work for long runtime. It weighs only 9.9 pounds making it lighter for heavy-duty work. 

This gasoline professional chainsaw is easy to start and operate with its powerful OxyPower engine which generates more power to cut hard and bigger size trees. It also comes with a 3-year warranty in case something goes wrong with the tool. 


Power SourceBattery Powered
Weight9.9 Pounds
Warranty3 Year
Dimensions26.94 x 9.03 x 10.88 inches
  •  x-torque lowers fuel consumption
  • 2 cycle engine
  • Transparent fuel indicator
  • Reduced vibration levels
  • Expensive


3. Husqvarna 460 Rancher Gas Chainsaw

Husqvarna climbing chainsaw

Husqvarna is a well-known brand in the chainsaw industry. This kit includes everything you need to start cutting chainsaws right away. It also offers many chainsaw options, including the one shown here.

The Husqvarna chainsaw has a 24-inch blade that’s quite good and can be used to cut trees very easily. This chainsaw comes with a 60.3cc gasoline motor that powers the blade to cut through wood. It comes with a Limited Warranty because it is a gas-powered chainsaw.

This chainsaw weighs 24 pounds, which is a little more when you’re trying to use it up a tree with one hand, Then you might have some problem.

The best feature of this saw is loving anti-vibration system which reduces vibration levels for more comfortable chainsaw operation. It comes with 9000 rpm, which gives you speed to let you cut quickly.


Power SourceGas Powered
Weight12.8 Pounds
Horse Power3.6 hp
Speed9000 rpm
Dimensions29 x 11 x 13 inches
  •  x-torque lowers fuel consumption
  • 2 cycle engine
  • Transparent fuel indicator
  • Reduced vibration levels
  • Expensive


4. DEWALT 20V MAX XR Chainsaw 

best climbing top handle chainsaw

Dewalt is a trusted brand of power tools. It also offers multiple options for chainsaws, such as the one we have just mentioned.

As per its name, the Dewalt 20v Max XR Chainsaw comes with a large-sized 12-inch blade that is the largest in battery chainsaw options. Since this blade is powered by a highly powerful 5 amp motor, you can expect it to offer a high cutting performance. This blade can easily be used to cut through branches and trees.

The 20-volt battery system uses 5 Ah lithium-ion cells As a result, you can expect a good battery life from this chainsaw while using its 12-inch long blade.

This chainsaw comes with a compact and lightweight design, only 8.8 Pounds, is very easy to try to use up a tree with one hand and can work for long hours without getting frequent fatigue feeling, possible to use this product for a long time.


Power SourceBattery Powered
Weight8.8 Pounds
Speed 25.2 feet/second
Dimensions25 x 9 x 9 inches
  • Highly efficient brushless motor
  • Tool-free chain tensioning
  • Relatively longer run times
  • Compact and lightweight
  • Easy and quick start
  • Relatively pricier


5. Worx WG309 Corded Electric Pole Chainsaw

Worx WG309 chainsaw

Worx is one the most highly-rated brands in power tools that we have mentioned. It is one of the most well-known electric chainsaw options we have ever mentioned.

As per its name, the Worx WG309 electric chainsaw comes with a size 10-inch blade that is the best in electric chainsaw options. Since this blade is powered by a highly powerful 8 amp motor, you can expect it to offer a high cutting performance. This blade can easily be used to cut through branches and trees.

The automatic chain tension system ensures a clean cut while trimming trees. An automatic chain oiling system is included along with a 200-ml oil tank. This chainsaw is covered by a 3-year warranty, which ensures it will last for many years without any issues.

The oil reservoir has a built-in indicator that shows where the oil is. This allows you to see exactly how much oil you have left and helps keep your chain spinning smoothly. Safety features include a low kickback design and a built-in brake. This detail is not often found on corded electric saws. Wrap-around handles allow for greater maneuverability and ease in larger jobs.


Power SourceCorded-Electric
Weight10 Pounds
Chain Speed27.8 feet/second
Warranty3 Years
Dimensions42 x 8 x 9 Inches
  • Auto-tensioning chain system
  • Low kickback and chain brake for safety
  • Auto chain lubrication
  • Oil level indicator
  • Ergonomic and  comfortable handle
  • Uses a lot of bar oil


6. Makita XCU06Z Brushless Cordless Chainsaw

Makita XCU06Z chainsaw

Makita is a highly popular brand of power tools that has a high user rating. Makita XCU06Z battery chainsaw can be a great option if you are looking for a highly powerful chainsaw.

This chainsaw emits zero emissions, which makes it more eco-friendly and lowers maintenance. This chainsaw makes it easy to adjust your chain while cutting.

If you don’t have earplugs, the noise of this chainsaw can be quite annoying. A fast-charging charger reduces downtime, which increases productivity.

There are convenient tool-less chain adjustment features and the handle is quite comfortable. It has a 10-inch guide bar that gives the machine more capacity.

It’s fast for a battery-powered chainsaw with a speed of 4720 fpm and can run on this for any capacity with its 18V guide bar. There is no fuel to clean out, air filters, mufflers to clean, or fuel to premix, which makes maintenance less tedious.


Power SourceBattery Powered
Item Weight6.6 lbs
Speed4,720 FPM
Displacement 22cc
Dimensions8.47 x 15.16 x 8.98 Inches
  • Quite
  • Easy to Use
  • Adjustable automatic chain
  • Battery lasts longer
  • Light in weight
  • May be short for some tasks


7. Echo CS271T12 Gas Powered Chainsaw

climbing chainsaw

The echo is a well-known brand for producing gas power tools. It offers many options, including multiple chainsaws. This makes it a great choice for many users.

The echo gas chainsaw comes with a 1-inch blade, just like the gas-powered ones. It uses a 35 CC gas engine, which is a bit silent but still provides a similar cutting performance. This gas-powered chainsaw comes with a 2-year warranty, which is very common for such chainsaws.

It features a semi-transparent oil reservoir, auto oiling, and chain tensioning. Safety features such as the anti-kickback bar and chain keep you safe when cutting hardwoods. This chainsaw is powerful and has extremely long battery life.

Our favorite feature about this chainsaw is its lightweight design. Out of all the chainsaws we tested, this one was one of the lightest. We had no problem handling and using this saw for extended periods of time. The handle is also very ergonomically designed, so this saw was comfortable to use as well.


Power SourceGas Powered
Weight11 Pounds
Warranty1 Year
Dimensions12 x 10 x 10 Inches
  • Highly powerful engine
  • Easy to start
  • Anti Vibration Handle
  • 2 Stroke Oil
  • Made In Japan
  • Battery not include


8. Tanaka TCS33EDTP/12 Top Handle Chainsaw

If you’re looking for a pro-grade chainsaw that is easy to start up and has a powerful engine, then the Tanaka TCS33EDTP top handle chainsaw might just be suitable for you.

For those of you that aren’t familiar with Tanaka, this company is based in Japan that has been in the industry for quite some time now and they have a pretty good reputation in power tools, especially chainsaws.

The bar and chain length is 14 inches, which isn’t too long. 12 inches is the typical length for a top handle saw. The chainsaw weighs in at 11.9 pounds, which is a tad bit on the hefty side, but it’s not all that bad.

This chainsaw is powered by gas and is strong enough for nearly every situation in the woods. The engine is a pure fire engine that doesn’t require a whole lot of energy.

You get a comfortable experience with this chainsaw since it offers a 5 point anti-vibration design. Even though this is a gas-powered chainsaw, it has a quick start function. It allows you to quickly start this chainsaw and start cutting right away.


Power SourceGas Powered
Weight11.9 Pounds
Horse Power1.6 hp
Dimensions11.2 x 15.4 x 11.8 Inches
  • The engine is strong and powerful
  • Easy start
  • Less fuel consumption
  • Automatic oiler
  • Quick chain adjustments
  • The chainsaw is 11.9 pounds


9. Echo CS-400 Gas Chainsaw

If you are looking for something a reasonable price top handle gas chainsaw with power too then Echo CS-400 could be the best one for you.

Echo CS-400 chainsaw comes with an 18-inch blade which is the typical length for a top handle saw. But it uses a smaller 40.6 CC gas engine that is a bit silent and still offers a very similar cutting performance. This gas-powered chainsaw comes with a 2-year warranty, which is very common for such chainsaws.

Well, it’s much more lightweight compared to other top picks. It’s still very manageable if you’re a strong man or woman.  We also liked the anti-vibration system helps in reducing fatigue and provides maximum comfort.

Users who have this chainsaw say it is lightweight and easy to use with one hand. They also mention that it is great for trimming small branches and trees on the ground, with one exception: starting it can be difficult.


Power SourceGas Powered
Weight10.1 Pounds
Warranty1 Year
Dimensions21 x 12 x 10 inches
  • Easy Start Engine
  • Engine Oil Included
  • Fully Assembled
  • This product is Not Returnable


Things to consider before buying the Best climbing chainsaw

Before you buy a product, several key points need to be under your radar before you make your final choice. Doing this helps you in choosing the right model that goes perfectly with you.

So, while selecting a top handle chainsaw, you should be aware of a few aspects and details before you purchase it.

1.  Performance

Checking the performance ratio of the chainsaw should be the first thing you take into account.

The performing capabilities of a gadget usually depend on a number of factors, such as the chain speed and the power of the device. It also depends on the fuel used, whether it is gas or electric.

So, you are in the market for one; select a chainsaw whose performance ratio meets the demand of the type of work that you need it for.

2. Convenience

It’s quite obvious that while buying a product, you would want your money’s worth out of it. You wouldn’t want to go for a gadget that is overly complicated or requires constant maintenance.

3. Protector

The engine protector is not available on some of the less expensive models of the sewing machines. The role of the protector is to keep any debris or wooden chips from entering the engine.

Without this, the engine will quickly wear out and will mandate a replacement.

4. Auto-oiling

Regular oiling is essential for chainsaws. The engine and chain will last a long time if they are properly oiled. However, the process of disassembling and then reassembling the gadget can be very tedious.

Therefore, you can save yourself a great deal of time if you buy a sawing machine that has the option of auto-oiling. With this feature, you can easily lubricate the gadget without taking it apart every single time for maintenance.

5. Weight

Chainsaws can be bulky and difficult to lift. They are not only difficult to use but can also cause fatigue over some time.

Weight is an important factor to consider. Lightweight models can be used to trim your yard for hours, without feeling tired.

A top handle chainsaw with a shorter bar length can also reduce its weight considerably.

6. Comfortable Use

There are three factors that determine the comfort level in a chainsaw- the dimensions, the weight, and the grip model.

7. Grip

A chainsaw is powerful heavy-duty machinery. If the device does not have a proper rubber grip-hold, then this can increase the chances of it slipping while working thereby, causing you severe injuries.

8. Other Aspects

It would also be useful if the device had an extra feature like “anti-vibration.” This prevents the device from shaking and allows you smooth cut through any kind of tree, regardless of its size.

9. Your budget

The amount that you spend on a chainsaw will determine the quality of your shopping experience. A cheaper model is better if you’re a beginner or don’t need to cut wood in difficult, complex positions.

However, If you’re a professional logger, or want your gadgets to last a long time, you can choose the more expensive and better-featured models.

We have listed products that are both high quality and affordable for a wide range of customers in this article.

10. Gas vs. Battery

The power and the performance of the machine depending on the type of engine that it has. There are two types available: the gas-powered engine and the battery-powered one.

Most consumers prefer the battery-powered model to the gas-powered one. You don’t need to spend more money on fuel for your device.

The most compatible battery-powered models use lithium-ion batteries. The battery can be charged quickly and has a longer lifespan than other batteries.

However, this model is slightly less powerful than a gas-powered one. Chainsaws that use gas have higher performance, but you will need to spend more money.

11. Safety Features

Whether you are using a  top handle one or a regular chainsaw, the safety features of the gadget should always be a priority on the list of things that you need to consider before buying it.

12. Rubber handle / Hand Guard

Rubberizing the handle and handguard reduce the likelihood of the chainsaw falling from your hands. This will also lower your chance of being hurt.

When you’re working on the device, you will have a firmer grip. Rubber handles have another benefit: they reduce the machine’s kick back while you are working on it.

13. Chain and Bar Length

The length of the bar and chain depends on what type of work you are using the chainsaw for.

14. Bar Length

There are many bar lengths. They are usually found within the range of 10 and 24 inches. The thickness of the wood you are cutting will determine the size.

If you’re cutting down a tree with 8 inches of diameter, you can choose a shorter bar. Most professional tree loggers prefer medium-range bar lengths, which are approximately 13 to 19 inches.

However, if you are aiming for a bigger tree, then you should go for the one with a longer bar. These would be approximately 20 to 24 inches in height.

It is important to remember that the longer the bar is, the easier it will be to cut through thick branches and trees.

How to Maintain a Chainsaw?

Chainsaws handle high pressure while cutting woods. Proper care is essential to ensure efficiency and high performance. Here are some tips to keep your chainsaw in perfect condition.

1.  Sharpening the Chain

The chainsaw blade must be sharper to speed up the cutting process. Sharp blades reduce the likelihood of kickback and slippage. A chainsaw filing kit is required to sharpen the blade. This kit includes a depth gauge and a sharpener. You can use them to file the blade teeth to the desired level of sharpness.

2. Clear the Debris

A chainsaw that is dirty quickly can cause it to wear out. The blade and other parts of the chainsaw can be corroded by mud or other impurities. It is important to clean the blade, teeth, and chainsaw after every use to prevent this.

3. Proper Chainsaw Tension

The blade might not turn at its full speed if the chain is too tight. If the chain is too loose, it could fall off the tree while being cut.

4. Chain Oil

Proper lubrication between the chain and the blade can cause overheating motors and damaged blades. Chain oil can be used to grease the chain if it appears dry. This will prevent the chain from sticking to the ground.

5. Protect It

Chainsaws that have been left in a shed for too long could have been exposed to moisture. Any power tool is susceptible to moisture, dust, weather conditions, or even humidity. If you don’t intend to use your chainsaw for a long period of time or want to winterize it, it is a good idea to keep it in a container.

6. Clean Air Filter

Chainsaws powered by gas use fuel and air to power the motor. An air filter is available to prevent dirt and dust from mixing with the fuel. Regular cleaning of the filter is recommended. Replace the filter if it is not cleaning the air. The engine can be damaged if dirt and dust build-up.

7. Clean Gas Tank

If you own a gas-powered chainsaw, this step should only be taken into consideration. It is best to empty the gas tank after you have not used the chainsaw in a while. If you leave the chainsaw idle with gas in, sludge can block fuel and carburetors, which will reduce its performance.

Frequently Asked Questions (FAQs)

Would you recommend using a climbing saw or a standard chainsaw for tree felling?

For the most part, felling trees is typically best left to professionally trained arborists who are equipped with climbing equipment designed for this purpose.

However, there are times when the need arises for homeowners to resort to chainsaws in order to remove large fallen trees from around their homes.

If you have never used a chainsaw before then it would be highly advisable that you first try your hand at cutting smaller diameter firewood logs before attempting something as precarious as removing massive tree branches hanging over your home.

Always stay alert and take proper precautions while using any power tools around your home.

Would I need an extension pole?

This is not typically recommended unless done so by a certified arborist or those who are trained for this purpose. For the average homeowner, it may be easier and safer to use a high-powered chainsaw that can reach out as far as needed without climbing equipment.

It would also help to ensure the safety of others around you such as children and pets if you do not have to worry about shifting or unstable branches raining down on them below.

If your tree does happen to be leaning away from the home, then using an extension pole may prove difficult and cause further damage along with potential harm when trying to control and maneuver the length and weight of the saw.

Do I need any other equipment?

Other tools that may come in handy during this task would be a pair of work gloves and some hearing protection. A good set of chainsaw earmuffs will help protect you against the high noise levels when using these types of power saws.

You can also rely on quality leather work gloves with added padding to protect your hands while climbing up and around the base of trees with heavy underbrush, debris, or snow.

It is important to stay calm and continue to focus all your attention on the task at hand when working with high-powered equipment in this matter. If an accident were to occur then you want to be able to keep track of what’s going on around you so that you can provide first aid or call for help if needed.

Final Thoughts

These are our reviews of the best climbing chainsaws. Worx WG322 is the no.1 pick for the best climbing chainsaw in 2021. Because it ticks all the boxes with a lightweight, comfortable grip, a good amount of power with 20V batteries, and safety features. 

But if you are looking for something more in the budget yet powerful DEWALT DCCS620P1 is our pick for the best value for money chainsaw.

You may read our articles on How to Hold Logs While Cutting with a Chainsaw and How to Start A Makita chainsaw.

Spread the love

Leave a Comment